Putty Transfer File Serial Port5/30/2023 ![]() When we use a 1 byte buffer, every time a byte is sent or received, the CPU gets a UART interrupt. The transmit FIFO is used to hold the data to be written to the serial port and the receive FIFO is used to hold the data received by the serial port. UART have dedicated memory in the form of a FIFO structure on both transmit and receive side. We have made use of a virtual COM port driver in order to communicate between our 2 applications (Python and Keil) by assigning them to 2 separate COM ports. And finally, echoing it back to the host PC.ĭue to unavailability of the board, this project was implemented only through Simulation in Keil µVision 5 Tool.Store it in memory and display it using TExaS Nokia 5110 screen.We will be sending a binary file from our host terminal to the microcontroller using Python application based GUI.We will use busy-wait to synchronize the software with the hardware. It should be capable for serial communication between two devices. The objective of this project is to transfer binary file (.bin) over UART (universal asynchronous receiver/transmitter) using FIFO.
0 Comments
Leave a Reply. |